Welcome to Engineering CAD Solutions

Testimonials

Consolidated Power
	"I would like to thank you and commend you for the excellent service you have provided in developing these drawings. You have taken a very large weight off my shoulders." Lloyd Bentley - Project Engineer

Alexandria Council

"Over the past 2 years Alexandria Council has engaged the services of Engineering CAD Solutions to aid in the programming and development of a desktop mapping system based on MicroStation Geographics and Bentley Redline. An essential part of this process was the data capture of Council's Common Effluent and Drainage schemes in Goolwa and Port Elliot. ECS completed the capture in a timely and cost effective manner to Council's requirements on symbology and level placement. I would have no hesitation in recommending ECS for any data capture projects that local governments may have."

Neville Styan - Technical Officer

City of Marion - South Australia

"Many staff members of the Marion Council, past and present, have undertaken MicroStation training under the tutorage of Graeme Rawlins. The CAD experience of each staff member we have sent for MicroStation Training has varied widely. Some have had previous experience with other CAD software, whilst others have had almost nil experience. In every case, however, Graeme has successfully been able to change his approach to his students, whilst still achieving the necessary requirement for training. Each of our staff members have, without fail, returned to our offices with a real appreciation of his training, regardless of their previous experience. Needless to say, Graeme has a natural ability to conduct training at any level.

Although training is an important part in the purchase of any equipment, support for the product you purchase is equally as vital. In this area, Engineering CAD Solutions excels to an unusually high standard. Graeme's knowledge of MicroStation is truly excellent, and our organisation is comforted with the confidence in the support we are provided by ECS and Graeme.

It would be remiss of me not to mention the always very polite, friendly and approachable disposition of Graeme. His excellent rapport with the Marion Council has greatly benefited our relationship with Engineering CAD Solutions and Bentley Systems P/L."

Alex Dorn - Survey and Design Coordinator

ELCO Electronics

"Over the past decade or so, ELCO Electronics and Engineering CAD Solutions (ECS) have worked together for on several projects, for clients as diverse as Oil and Gas, Energy and Government Agencies.

The complimentary skill sets of ECS’s two principles, Peter and Graeme, provide, what I have to come to believe is, a unique capability to implement cost effective and innovative solutions in a range of disciplines.
Their ability to communicate openly, and with confidence is a key factor in the success we have experienced collaborating on projects both as primary and sub contractors.

I have also worked with several of their staff over the years and found them to be equally reliable and forthcoming with knowledgeable assistance when called upon (in my case quite often from a remote or difficult to access location).
If ECS do not directly have the appropriate personnel within their organisation, then they are quick to seek out individuals or companies who do and seamlessly integrate their services into the project in hand.

Project meetings are always open and frank and you are never in doubt as to what the current status is.
I have enjoyed working with ECS in the past and look forward to many more years of association with them."

Malcolm J. Ling - Engineer